Máy đo độ dày lớp mạ – KOCOUR
Mô tả sản phẩm
Accuracy, 98% +
Direct Readout
Print Capability
Evaluation of Inter-metallic Layers
Digital Calibration
STEP (Simultaneous Thickness and Electochemical Potential)
RS232 Interface to PC
Specifications
Model 6000 Tester: Line voltage 115V, 50 or 60Hz & 230V, 50 or 60Hz standard. Regulating features maintain even current output.
Dimensions: 15″W x 12″D x 6.5″H (38.1cm x 30.5cm x 16.5cm) Net Weight: 20 Lbs 9.0kg).
NF6M Stand (optinal)
Dimensions: 8″W x 10″D x 14″H (20.3cm x 25.4cm x 35.6cm) Net Weight: 8 Lbs (3.6kg).
Applications: Measures almost all electro-deposited metals on metallic or nonmetallic substrates.
Measures multiple coatings and gives individual readings.
Measures plating thickness on wire.
Measures very thin coatings such as decorative chromium and gold. Readings in millionths.
Measures the electro-chemical potential difference between duplex and triplex nickel layers (STEP).
Measures electroless nickel.
Measuring Principle
The Kocour 6000 digital Thickness Tester utilizes the coulometric principle. A small test area is anodically deplated with an electrolytic solution applied at a constant current. Because the testing solution is selective, it removes only the plating. Thickness is determined by the current and time required to remove the plating. When the substrate is exposed, the 6000 turns off automatically and displays the thickness on the instrument panel.
The 6000 meets the requirements of ASTM Specifications B504, B298, B355 and ISO Standard 2177.
Versatility
Kocour Testers offer the ultimate in versatility. Regardless of the number of plated layers, each can be individually measured. Base material, shape, surface roughness, electrical or magnetic properties do not affect results. Measure anything from 0.002 mil (0,05 microns) to 2 mils (50 microns).
Speed: 30-60 Seconds per test.
Operation: Six simple steps. Easy to learn. Accurate and repeatable measurement even by the most inexperienced operator.
Construction: Built to operate reliably under all conditions, shop or lab. Heavy gauge corrosion-resistant steel case resists occupational wear and tear.
Direct Readout
Print Capability
Evaluation of Inter-metallic Layers
Digital Calibration
STEP (Simultaneous Thickness and Electochemical Potential)
RS232 Interface to PC
Specifications
Model 6000 Tester: Line voltage 115V, 50 or 60Hz & 230V, 50 or 60Hz standard. Regulating features maintain even current output.
Dimensions: 15″W x 12″D x 6.5″H (38.1cm x 30.5cm x 16.5cm) Net Weight: 20 Lbs 9.0kg).
NF6M Stand (optinal)
Dimensions: 8″W x 10″D x 14″H (20.3cm x 25.4cm x 35.6cm) Net Weight: 8 Lbs (3.6kg).
Applications: Measures almost all electro-deposited metals on metallic or nonmetallic substrates.
Measures multiple coatings and gives individual readings.
Measures plating thickness on wire.
Measures very thin coatings such as decorative chromium and gold. Readings in millionths.
Measures the electro-chemical potential difference between duplex and triplex nickel layers (STEP).
Measures electroless nickel.
Measuring Principle
The Kocour 6000 digital Thickness Tester utilizes the coulometric principle. A small test area is anodically deplated with an electrolytic solution applied at a constant current. Because the testing solution is selective, it removes only the plating. Thickness is determined by the current and time required to remove the plating. When the substrate is exposed, the 6000 turns off automatically and displays the thickness on the instrument panel.
The 6000 meets the requirements of ASTM Specifications B504, B298, B355 and ISO Standard 2177.
Versatility
Kocour Testers offer the ultimate in versatility. Regardless of the number of plated layers, each can be individually measured. Base material, shape, surface roughness, electrical or magnetic properties do not affect results. Measure anything from 0.002 mil (0,05 microns) to 2 mils (50 microns).
Speed: 30-60 Seconds per test.
Operation: Six simple steps. Easy to learn. Accurate and repeatable measurement even by the most inexperienced operator.
Construction: Built to operate reliably under all conditions, shop or lab. Heavy gauge corrosion-resistant steel case resists occupational wear and tear.
Hotline (Zalo, Viber, Phone): 0903.71.51.78
Skype: Quocthinh,le
Email: Thinhhtvsci@gmail.com
CÔNG TY TNHH VẬT TƯ KHOA HỌC KỸ THUẬT HTV
Trụ sở chính: 549/28/2A Lê Văn Thọ, P14, Q. Gò Vấp, Tp.HCM
Mã số thuế: 0312216621
Tel: 08. 66851358 Fax: 08. 39160358
Web: www.htvsci.com Email: sales@htvsci.com
Mô tả sản phẩm
Accuracy, 98% +
Direct Readout
Print Capability
Evaluation of Inter-metallic Layers
Digital Calibration
STEP (Simultaneous Thickness and Electochemical Potential)
RS232 Interface to PC
Specifications
Model 6000 Tester: Line voltage 115V, 50 or 60Hz & 230V, 50 or 60Hz standard. Regulating features maintain even current output.
Dimensions: 15″W x 12″D x 6.5″H (38.1cm x 30.5cm x 16.5cm) Net Weight: 20 Lbs 9.0kg).
NF6M Stand (optinal)
Dimensions: 8″W x 10″D x 14″H (20.3cm x 25.4cm x 35.6cm) Net Weight: 8 Lbs (3.6kg).
Applications: Measures almost all electro-deposited metals on metallic or nonmetallic substrates.
Measures multiple coatings and gives individual readings.
Measures plating thickness on wire.
Measures very thin coatings such as decorative chromium and gold. Readings in millionths.
Measures the electro-chemical potential difference between duplex and triplex nickel layers (STEP).
Measures electroless nickel.
Measuring Principle
The Kocour 6000 digital Thickness Tester utilizes the coulometric principle. A small test area is anodically deplated with an electrolytic solution applied at a constant current. Because the testing solution is selective, it removes only the plating. Thickness is determined by the current and time required to remove the plating. When the substrate is exposed, the 6000 turns off automatically and displays the thickness on the instrument panel.
The 6000 meets the requirements of ASTM Specifications B504, B298, B355 and ISO Standard 2177.
Versatility
Kocour Testers offer the ultimate in versatility. Regardless of the number of plated layers, each can be individually measured. Base material, shape, surface roughness, electrical or magnetic properties do not affect results. Measure anything from 0.002 mil (0,05 microns) to 2 mils (50 microns).
Speed: 30-60 Seconds per test.
Operation: Six simple steps. Easy to learn. Accurate and repeatable measurement even by the most inexperienced operator.
Construction: Built to operate reliably under all conditions, shop or lab. Heavy gauge corrosion-resistant steel case resists occupational wear and tear.
Direct Readout
Print Capability
Evaluation of Inter-metallic Layers
Digital Calibration
STEP (Simultaneous Thickness and Electochemical Potential)
RS232 Interface to PC
Specifications
Model 6000 Tester: Line voltage 115V, 50 or 60Hz & 230V, 50 or 60Hz standard. Regulating features maintain even current output.
Dimensions: 15″W x 12″D x 6.5″H (38.1cm x 30.5cm x 16.5cm) Net Weight: 20 Lbs 9.0kg).
NF6M Stand (optinal)
Dimensions: 8″W x 10″D x 14″H (20.3cm x 25.4cm x 35.6cm) Net Weight: 8 Lbs (3.6kg).
Applications: Measures almost all electro-deposited metals on metallic or nonmetallic substrates.
Measures multiple coatings and gives individual readings.
Measures plating thickness on wire.
Measures very thin coatings such as decorative chromium and gold. Readings in millionths.
Measures the electro-chemical potential difference between duplex and triplex nickel layers (STEP).
Measures electroless nickel.
Measuring Principle
The Kocour 6000 digital Thickness Tester utilizes the coulometric principle. A small test area is anodically deplated with an electrolytic solution applied at a constant current. Because the testing solution is selective, it removes only the plating. Thickness is determined by the current and time required to remove the plating. When the substrate is exposed, the 6000 turns off automatically and displays the thickness on the instrument panel.
The 6000 meets the requirements of ASTM Specifications B504, B298, B355 and ISO Standard 2177.
Versatility
Kocour Testers offer the ultimate in versatility. Regardless of the number of plated layers, each can be individually measured. Base material, shape, surface roughness, electrical or magnetic properties do not affect results. Measure anything from 0.002 mil (0,05 microns) to 2 mils (50 microns).
Speed: 30-60 Seconds per test.
Operation: Six simple steps. Easy to learn. Accurate and repeatable measurement even by the most inexperienced operator.
Construction: Built to operate reliably under all conditions, shop or lab. Heavy gauge corrosion-resistant steel case resists occupational wear and tear.
Hotline (Zalo, Viber, Phone): 0903.71.51.78
Skype: Quocthinh,le
Email: Thinhhtvsci@gmail.com
CÔNG TY TNHH VẬT TƯ KHOA HỌC KỸ THUẬT HTV
Trụ sở chính: 549/28/2A Lê Văn Thọ, P14, Q. Gò Vấp, Tp.HCM
Mã số thuế: 0312216621
Tel: 08. 66851358 Fax: 08. 39160358
Web: www.htvsci.com Email: sales@htvsci.com
